1# Use this hook to configure devise mailer, warden hooks and so forth.
  2# Many of these configuration options can be set straight in your model.
  3Devise.setup do |config|
  4  # ==> Mailer Configuration
  5  # Configure the e-mail address which will be shown in Devise::Mailer,
  6  # note that it will be overwritten if you use your own mailer class with default "from" parameter.
  7  config.mailer_sender = "please-change-me-at-config-initializers-devise@example.com"
  8
  9  # Configure the class responsible to send e-mails.
 10  # config.mailer = "Devise::Mailer"
 11
 12  # ==> ORM configuration
 13  # Load and configure the ORM. Supports :active_record (default) and
 14  # :mongoid (bson_ext recommended) by default. Other ORMs may be
 15  # available as additional gems.
 16  require 'devise/orm/active_record'
 17
 18  # ==> Configuration for any authentication mechanism
 19  # Configure which keys are used when authenticating a user. The default is
 20  # just :email. You can configure it to use [:username, :subdomain], so for
 21  # authenticating a user, both parameters are required. Remember that those
 22  # parameters are used only when authenticating and not when retrieving from
 23  # session. If you need permissions, you should implement that in a before filter.
 24  # You can also supply a hash where the value is a boolean determining whether
 25  # or not authentication should be aborted when the value is not present.
 26  # config.authentication_keys = [ :email ]
 27
 28  # Configure parameters from the request object used for authentication. Each entry
 29  # given should be a request method and it will automatically be passed to the
 30  # find_for_authentication method and considered in your model lookup. For instance,
 31  # if you set :request_keys to [:subdomain], :subdomain will be used on authentication.
 32  # The same considerations mentioned for authentication_keys also apply to request_keys.
 33  # config.request_keys = []
 34
 35  # Configure which authentication keys should be case-insensitive.
 36  # These keys will be downcased upon creating or modifying a user and when used
 37  # to authenticate or find a user. Default is :email.
 38  config.case_insensitive_keys = [ :email ]
 39
 40  # Configure which authentication keys should have whitespace stripped.
 41  # These keys will have whitespace before and after removed upon creating or
 42  # modifying a user and when used to authenticate or find a user. Default is :email.
 43  config.strip_whitespace_keys = [ :email ]
 44
 45  # Tell if authentication through request.params is enabled. True by default.
 46  # It can be set to an array that will enable params authentication only for the
 47  # given strategies, for example, `config.params_authenticatable = [:database]` will
 48  # enable it only for database (email + password) authentication.
 49  # config.params_authenticatable = true
 50
 51  # Tell if authentication through HTTP Auth is enabled. False by default.
 52  # It can be set to an array that will enable http authentication only for the
 53  # given strategies, for example, `config.http_authenticatable = [:token]` will
 54  # enable it only for token authentication. The supported strategies are:
 55  # :database      = Support basic authentication with authentication key + password
 56  # :token         = Support basic authentication with token authentication key
 57  # :token_options = Support token authentication with options as defined in
 58  #                  http://api.rubyonrails.org/classes/ActionController/HttpAuthentication/Token.html
 59  # config.http_authenticatable = false
 60
 61  # If http headers should be returned for AJAX requests. True by default.
 62  # config.http_authenticatable_on_xhr = true
 63
 64  # The realm used in Http Basic Authentication. "Application" by default.
 65  # config.http_authentication_realm = "Application"
 66
 67  # It will change confirmation, password recovery and other workflows
 68  # to behave the same regardless if the e-mail provided was right or wrong.
 69  # Does not affect registerable.
 70  # config.paranoid = true
 71
 72  # By default Devise will store the user in session. You can skip storage for
 73  # :http_auth and :token_auth by adding those symbols to the array below.
 74  # Notice that if you are skipping storage for all authentication paths, you
 75  # may want to disable generating routes to Devise's sessions controller by
 76  # passing :skip => :sessions to `devise_for` in your config/routes.rb
 77  config.skip_session_storage = [:http_auth]
 78
 79  # ==> Configuration for :database_authenticatable
 80  # For bcrypt, this is the cost for hashing the password and defaults to 10. If
 81  # using other encryptors, it sets how many times you want the password re-encrypted.
 82  #
 83  # Limiting the stretches to just one in testing will increase the performance of
 84  # your test suite dramatically. However, it is STRONGLY RECOMMENDED to not use
 85  # a value less than 10 in other environments.
 86  config.stretches = Rails.env.test? ? 1 : 10
 87
 88  # Setup a pepper to generate the encrypted password.
 89  # config.pepper = "2b99acaf8fffc3f7e320a861de4b0a58a846c8f36e449c2625ea483d79e4aab3390a66d065214b9b98a6e9eb43ef1ef6e70e6f4c85d0ded2f8e577c3bfd2d7e1"
 90
 91  # ==> Configuration for :confirmable
 92  # A period that the user is allowed to access the website even without
 93  # confirming his account. For instance, if set to 2.days, the user will be
 94  # able to access the website for two days without confirming his account,
 95  # access will be blocked just in the third day. Default is 0.days, meaning
 96  # the user cannot access the website without confirming his account.
 97  # config.allow_unconfirmed_access_for = 2.days
 98
 99  # A period that the user is allowed to confirm their account before their
100  # token becomes invalid. For example, if set to 3.days, the user can confirm
101  # their account within 3 days after the mail was sent, but on the fourth day
102  # their account can't be confirmed with the token any more.
103  # Default is nil, meaning there is no restriction on how long a user can take
104  # before confirming their account.
105  # config.confirm_within = 3.days
106
107  # If true, requires any email changes to be confirmed (exactly the same way as
108  # initial account confirmation) to be applied. Requires additional unconfirmed_email
109  # db field (see migrations). Until confirmed new email is stored in
110  # unconfirmed email column, and copied to email column on successful confirmation.
111  config.reconfirmable = true
112
113  # Defines which key will be used when confirming an account
114  # config.confirmation_keys = [ :email ]
115
116  # ==> Configuration for :rememberable
117  # The time the user will be remembered without asking for credentials again.
118  # config.remember_for = 2.weeks
119
120  # If true, extends the user's remember period when remembered via cookie.
121  # config.extend_remember_period = false
122
123  # Options to be passed to the created cookie. For instance, you can set
124  # :secure => true in order to force SSL only cookies.
125  # config.rememberable_options = {}
126
127  # ==> Configuration for :validatable
128  # Range for password length. Default is 8..128.
129  config.password_length = 8..128
130
131  # Email regex used to validate email formats. It simply asserts that
132  # one (and only one) @ exists in the given string. This is mainly
133  # to give user feedback and not to assert the e-mail validity.
134  # config.email_regexp = /\A[^@]+@[^@]+\z/
135
136  # ==> Configuration for :timeoutable
137  # The time you want to timeout the user session without activity. After this
138  # time the user will be asked for credentials again. Default is 30 minutes.
139  # config.timeout_in = 30.minutes
140
141  # If true, expires auth token on session timeout.
142  # config.expire_auth_token_on_timeout = false
143
144  # ==> Configuration for :lockable
145  # Defines which strategy will be used to lock an account.
146  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
147  # :none            = No lock strategy. You should handle locking by yourself.
148  # config.lock_strategy = :failed_attempts
149
150  # Defines which key will be used when locking and unlocking an account
151  # config.unlock_keys = [ :email ]
152
153  # Defines which strategy will be used to unlock an account.
154  # :email = Sends an unlock link to the user email
155  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
156  # :both  = Enables both strategies
157  # :none  = No unlock strategy. You should handle unlocking by yourself.
158  # config.unlock_strategy = :both
159
160  # Number of authentication tries before locking an account if lock_strategy
161  # is failed attempts.
162  # config.maximum_attempts = 20
163
164  # Time interval to unlock the account if :time is enabled as unlock_strategy.
165  # config.unlock_in = 1.hour
166
167  # ==> Configuration for :recoverable
168  #
169  # Defines which key will be used when recovering the password for an account
170  # config.reset_password_keys = [ :email ]
171
172  # Time interval you can reset your password with a reset password key.
173  # Don't put a too small interval or your users won't have the time to
174  # change their passwords.
175  config.reset_password_within = 6.hours
176
177  # ==> Configuration for :encryptable
178  # Allow you to use another encryption algorithm besides bcrypt (default). You can use
179  # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1,
180  # :authlogic_sha512 (then you should set stretches above to 20 for default behavior)
181  # and :restful_authentication_sha1 (then you should set stretches to 10, and copy
182  # REST_AUTH_SITE_KEY to pepper).
183  #
184  # Require the `devise-encryptable` gem when using anything other than bcrypt
185  # config.encryptor = :sha512
186
187  # ==> Configuration for :token_authenticatable
188  # Defines name of the authentication token params key
189  # config.token_authentication_key = :auth_token
190
191  # ==> Scopes configuration
192  # Turn scoped views on. Before rendering "sessions/new", it will first check for
193  # "users/sessions/new". It's turned off by default because it's slower if you
194  # are using only default views.
195  # config.scoped_views = false
196
197  # Configure the default scope given to Warden. By default it's the first
198  # devise role declared in your routes (usually :user).
199  # config.default_scope = :user
200
201  # Set this configuration to false if you want /users/sign_out to sign out
202  # only the current scope. By default, Devise signs out all scopes.
203  # config.sign_out_all_scopes = true
204
205  # ==> Navigation configuration
206  # Lists the formats that should be treated as navigational. Formats like
207  # :html, should redirect to the sign in page when the user does not have
208  # access, but formats like :xml or :json, should return 401.
209  #
210  # If you have any extra navigational formats, like :iphone or :mobile, you
211  # should add them to the navigational formats lists.
212  #
213  # The "*/*" below is required to match Internet Explorer requests.
214  # config.navigational_formats = ["*/*", :html]
215
216  # The default HTTP method used to sign out a resource. Default is :delete.
217  config.sign_out_via = :delete
218
219  # ==> OmniAuth
220  # Add a new OmniAuth provider. Check the wiki for more information on setting
221  # up on your models and hooks.
222  # config.omniauth :github, 'APP_ID', 'APP_SECRET', :scope => 'user,public_repo'
223
224  # ==> Warden configuration
225  # If you want to use other strategies, that are not supported by Devise, or
226  # change the failure app, you can configure them inside the config.warden block.
227  #
228  # config.warden do |manager|
229  #   manager.intercept_401 = false
230  #   manager.default_strategies(:scope => :user).unshift :some_external_strategy
231  # end
232
233  # ==> Mountable engine configurations
234  # When using Devise inside an engine, let's call it `MyEngine`, and this engine
235  # is mountable, there are some extra configurations to be taken into account.
236  # The following options are available, assuming the engine is mounted as:
237  #
238  #     mount MyEngine, at: "/my_engine"
239  #
240  # The router that invoked `devise_for`, in the example above, would be:
241  # config.router_name = :my_engine
242  #
243  # When using omniauth, Devise cannot automatically set Omniauth path,
244  # so you need to do it manually. For the users scope, it would be:
245  # config.omniauth_path_prefix = "/my_engine/users/auth"
246end